EverFocus EPHD08 Uživatelský manuál stáhnout pdf (Strana 55)

4.3.3 Motion

Figure 4-4 Camera Menu – Motion

Camera: Select the camera you wish to configure. “Title” will change to the title name of the selected

camera.

Enable: Check box to enable motion detection. Other motion options will not be available unless this

feature is selected.

Log: Check this box to record motion events in the log.

HD Monitor: HD monitor display options when a motion event occurs.

No change: No change on the main monitor display.

Full screen:

A full screen of the event camera will display on the HD monitor.

Pre-alarm Record: Check box to start copying recorded video to the hard disk from 5 seconds before the

motion event. (Pre-alarm recording rate will follow the “Normal” frame rate setting)

Buzzer: Check this box to enable the buzzer when a motion event is triggered.

Email Notify: Check this box to send email notification when a motion event is detected. Email operation

requires that valid email settings have been entered in the Network Setting/Email setup screen. (See

Section 4.6.2 Email for more information.)

Network Alarm: Check this box to send out a network alarm to a client PC when motion occurs. (This

feature requires PowerCon software on the client PC and proper settings for the Alarm Server in the

Network Setup menu; see Section 4.6.4 Alarm Server for more information.)

Auto Lock: Check the box and the events will be recorded in a write protected segment of the Hard Disk.

(DVR will lock a period of time when the alarm occurs, the length of time will depend on DVR setting)

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 141 142

Žádné komentáře

EverFocus EPHD08 Uživatelský manuál Strana 55