EverFocus EPHD08 Uživatelský manuál Strana 1

User Manual EEPPHHDD0088 DDVVRR 8 channel HD-CCTV Digital Video Recorder

2 3 USB2.0 ports for video archive and mouse usage  Multi –language support  19” rack mountable – rack ears included 1.2 PACKAGE CONTENTS 

92unit during the upgrade; this can cause the system to fail to recover, requiring factory service to repair. Configurations Load Factory Default:

934.11 INFORMATION Figure 4-41 is a screenshot of the INFORMATION MENU. This menu displays important (read only) system information. Figure 4-41

944.11.2 Log Figure 4-42 Information Menu – Log This screen is used to choose, display and/or export log entries. From Date: Select starting date

95Export Log to USB: Press “Export’ button to export log data to USB. Figure 4-43 Log List Prev Page: Go to the previous page of log. Next Page

965 Networking Overview This chapter will give you a basic instruction on how to set up the DVR for network connection. It is highly recommended th

975.4 Virtual Ports A port number represents a "channel" or entryway for network communications. Port numbers allow different computers

98 The modem/router was either installed by your Internet service provider or purchased by you to establish a connection to the Internet. A router a

99 2. Direct High Speed Modem Connection: A direct modem connection uses a standard network cable to connect the modem directly to a computer (or i

100Connection Procedure:  The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have never made a cross-ov

101

31.3 SPECIFICATIONS Paragon HD DVR – EPHD08 HD-SDI Camera Video Inputs 8 BNC connectors Recording Rate/Resolution 120/100 FPS @1080p; 15/12,5 FP

102

103  Click on the option that says “Use the following IP address”  Assign an IP address of 192.168.1.2, a Subnet Mask of 255.255.255.0, and

1045.8 Direct High Speed Modem Connection Straight Through Ethernet Cable Pin outs: The Figure below shows the pin configurations for a straigh

105 Log into the EverFocus DVR menu and go to the Network Setting Menu.  Input the Static IP address, the Subnet Mask, and the Gateway that yo

1065.9 Router or LAN Connection Straight Through Ethernet Cable Pin outs: The Figure below shows the pin configurations for a straight cable.

107  Once you have a straight through cable plug one end into the LAN port on the back of the recorder and the other into the router.  Log into

108number of the IP address. For example, if the IP address of the computer is 192.168.2.101, the DVR’s IP address should be 192.168.002.050.  T

1096 REMOTE OPERATION FROM BROWSER 6.1 CONNECTING TO EPHD08 To access the DVR from a computer, open an Internet Explorer window and in the address b

110 Enter a user name and password to access the recorder. These can be changed in the System section of the Main Menu.  The default user name

111Install the ePlusDVR.cab file when prompted to do so. Once the file finishes installing, you will return to the screen like the one below.

41.4 FRONT PANEL Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding buttons on the include

112 Right click on the yellow bar and select “Run Add-on…” Install the MSXML file when prompted to do so. Now, you will able to see the remote

1136.2.2 Enabling ActiveX Controls Note: This section is only necessary if you DO NOT see the yellow ActiveX bar at the top of your browser screen w

114In the Security Settings window, scroll to “ActiveX controls and plug-ins” Set the controls as follows: “Enable”:  Allow previously unused

115Click the Refresh button to reload the page. Install the ePlusDVR.cab file when prompted to do so. Once the file finishes installing, you w

1166.3 REMOTE LIVE VIEW 1. Click on a camera number on the left side of the display to switch that camera to full screen. Click on “4UP” to dis

117 Camera Setup Record Setup Alarm Setup Schedule Setup Network Setup Hard Disk Setup Display Setup System Setup Information Setup Copy

1186.4 REMOTE PLAYBACK To playback the video, click the “Search” button. Select from “Time Search”, “Event Search”, or “Smart Search”. For more de

1197 EVERFOCUS DDNS SETUP Setup Steps: Step 1. Set up the Network Menu according to the instructions detailed in the Networking chapter. (Make s

120settings and DDNS name and resubmit the DDNS name until you get “Success”. Step 5. You should now be able to connect by typing the name you cr

1218 LINKSYS & D-LINK PORT FORWARDING 8.2 TYPICAL LINKSYS PORT FORWARDING This section will cover a few simple configurations for the Linksys

58) Record: RECORD key for manual start of recording / recording standby (event recording). LED will be ON if DVR is recording or in record stan

122 Applications and Gaming allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specia

1238.3 TYPICAL D-LINK PORT FORWARDING This section will cover a few simple configurations for the D-Link router. This chapter is only to offer som

124Click Virtual Servers on the left to bring up the following screen. Virtual Servers allows users who are connecting remotely to access service

125Here is an example of the information for each service: Name Private IP Protocol Private Port Public Port Schedule HTTP 192.168.1.50 Both 80 8

1269 TROUBLESHOOTING If you have problems with the system, run through the following checklist to see if you can solve the problem.  The DVR w

127 Make sure you are using the correct WAN IP address given by the ISP, or, if you have a Dynamic IP, check if the IP address has changed; use DD

128APPENDIX A: TIMING OF ALARM MODES Transparent Mode Input EventAlarm Durationtt Event = t Reaction t Event: Duration of alarm input source (mo

129Timeout Mode tInput EventAlarm Durationt Duration = t Reactiont Event t Event: Duration of alarm input source (motion, contact, system events

130Timeout Mode: Retrigger of Alarms t Event: Duration of alarm input source (motion, contact, system events...) t Duration: Alarm duration f

131APPENDIX B: EXPRESS SETUP RECORDING VALUE SELECTION RULES Case 1: Record Mode: Normal + Event Record With: Recording days The DVR wi

61.5 REAR PANEL During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the rear panel.

132Case 3: Record Mode: Normal + Event or Event Only Record With: Preset Setting DVR will apply the settings in the table below to all cameras acco

133APPENDIX C: REMOTE CONTROL The IR remote control is an accessory to enhance the convenient operation of the DVR. You can perform all the setting

134 Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room

7○7 HDMI Out: Provides an uncompressed all-digital video interface between the HD DVR and HDMI-compatible monitor. HDMI output format is 1920x10

82 Installation 2.1 HD-CCTV wiring for video inputs 2.1.1 Understanding HD-CCTV signals and wiring Even if EverFocus HD-CCTV equipment uses co

9Well known signal parts such as Sync, Burst and others do not exist here. The high frequencies do not allow a signal evaluation by standard oscillo

102.1.4 Cable installation Please make sure, that the coaxial cable is not squeezed at any position. Also the max. bending radius defined by the

112.1.7 Extended cable lengths with fiber optics transmission The maximum distance between camera and receiving device can be extended by fiber op

EVERFOCUS ELECTRONICS CORPORATION EPHD08 DVR Instruction Manual  2010 EverFocus Electronics Corp www.everfocus.com All rights reserved. No

122.1.8 Monitor installation The EPHD-8 provides 2 main monitor outputs with identical functionality - VGA and HDMI. Both outputs can be used simu

132.2 AUDIO INSTALLATION This DVR provides 8 line level audio input and 1 line level audio output. ATTENTION: The direct connection of a non-amp

14 Output relay in idle state 2.4 RS-485 keyboard / PTZ Installation All functions can be remote-controlled by the EKB-500 universal keyboard. Usi

15An EDA997A RS-485 signal distributor may be used to use a star wiring configuration. Star wiring with RS-485 signal distributor A RS-485 distr

162.4.2 RS-485 socket pin assignment The RS485 pin assignment is as follows: 2.4.3 EKB-500 connection with network patch cable For a simple, sho

172.5 USB-Mouse installation Connect the USB mouse to one of the 2 USB ports. (This can be done while DVR is powered on) NOTE: Recommended mouse

182.6.2 Network Connection through Patch Cable The connection to an existing network requires a normal patch cable (straight-through). The illustr

193 MOUSE AND FRONT PANEL OPERATION EPHD08 DVRs support multiple sources to control the DVR. It can be controlled with a mouse, the front panel, an

203.1.3 Operation in the Configuration Menus Click on the icon to access the Configuration Menu. The Configuration menu screens (shown in Figure

21 Bar: Click and hold on the bar to adjust the set point Left or Right. * Note about on-screen keyboard: Click on a button to input that characte

ii Safety Precautions  Refer all work related to the installation of this product to qualified service personnel or system installers.  Do no

222.2 General Front Panel Operation 2.2.1 How to select a channel / Enable audio 1. In a view consisting of more than one channel, dial the jog/sh

23 Figure 3-3 OSD Menu 1. In section 1, there are ten setup options available. Use the jog/shuttle to highlight an icon and press “Enter” to selec

24 Bar: Press “Enter” key to activate the slider, then use the jog/shuttle to adjust the setting. Press “Enter” again to finalize the changes. * No

253. GENERAL DVR OPERATIONS This chapter introduces the operations on major functions including playback, layout change, sequence, triplex operation

26+ To input password by mouse: click the password field to bring up the on-screen keyboard (see Figure 3-2 On-screen Keyboard). Click on each butto

273.5 PLAYBACK The playback bar is the fastest way to show video from the exact time which users want to see. The playback bar allows a user to see

2812. Playback speed indicator 13. Press “X” to close the playback bar. 14. Start time for bar (the left-most point of the time bar) 15. Current pla

2911. Steps to run a tour a. Click “Tour” button b. Click the number of the desired tour c. Click “Go” button 12. Steps to remove a tour (if supp

30 Figure 3-3 Express Control PTZ The screen is divided into a 4x4 grid. The function of each section is defined as below:  1: PTZ pan/tilt left a

313.7 LAYOUT The EPHD08 DVR has several display modes available, depending on the number of cameras the DVR supports. The different available layou

iii Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol cleaners. Use a damp cloth for cleaning  Atta

323.9 DISPLAY Press the Display button on the menu by using the mouse or selecting this icon with the front panel keys and pressing ‘Enter’. Pr

334. When in ZOOM mode, the mouse cursor will change to a different icon in different areas of the screen. Or, use the jog/shuttle to bring a diffe

343.12.1 Time Search Figure 3-5 Search Menu – Time Search Play From: Select the time to begin the search by choosing the Date and Time. Click on

353.12.2 Event Search Figure 3-6 Search Menu – Event Search From: Select starting date and time To: Select ending date and time. Camera: Select w

36Prev Page: Go to previous page Next Page: Go to next page Play: Playback selected item Copy: Copy selected item 3.12.3 Smart Search Smart Search

37Grid Setting: Press Grid Setting button to open the motion grid setup window. Edit Motion Grid: Press this button to edit the motion grid (See Fi

38 Click on the “Search” button to start searching. The search results will be shown as a list of events. Prev Page: Go to previous page Next Page

393.13 COPY To bring up Copy menu: By mouse: Right-click to bring up the menu bar and click on to enter Copy Menu. By front panel: Press the “Cop

40 Figure 3-10 Logout Confirmation window Press “Yes” button when you are ready to logout from the system. You will need to login again before acce

414 DVR CONFIGURATION This chapter will walk you through the DVR Menu Settings step by step and show you how to set the DVR for your specific appli

iv This Product is RoHS compliant. WEEE The information in this manual was current upon publication. The manufacturer

42Date: Sets the current date of DVR. Time: Sets the current time of DVR. Record Mode: Choose from Normal+Event: Normal recording plus event recor

43DHCP: DHCP server in LAN will automatically assign IP for network connection. PPPoE: This is for direct DSL connection application ONLY (no router

444.3 CAMERA SETTING Figure 4-2 is a screenshot of the CAMERA SETTING MENU. This menu is used to configure individual camera settings. Figure 4-2

454.3.2 Basic Setting Figure 4-3 Camera Menu-Basic Setting Camera: Select the camera to be configured. Title: The title setting allows you to assi

46Resolution: Recording resolution is displayed only. Record Quality: Select an image quality for recording. There are five different qualities ava

474.3.3 Motion Figure 4-4 Camera Menu – Motion Camera: Select the camera you wish to configure. “Title” will change to the title name of the sel

48Alarm Output: This will transmit a signal through the alarm output relay. It can be set to either “NONE” (not active), “1” or “2” (indicating whic

495. Press Enter key at the starting point. 6. Use arrow keys to select motion area; the shape of the proposed area will be displayed. 7. Press E

504.3.5 Video Loss Figure 4-6 Camera Menu – Video Loss Camera: Select the camera you wish to configure, “Title” will change to the title name of

51Trans+Timeout: Alarm output continues until the event ends, then continues for a set time duration. Apply To: This button can be used to copy the

v TABLE OF CONTENTS 1 PRODUCT OVERVIEW... 1 1.1

52Schedule Record: Use schedule recording mode. For Schedule recording, the only way to stop the DVR from recording is to turn schedule recording o

534.5 ALARM & EVENT SETTING Figure 4-4 is a screenshot of the ALARM & EVENT SETTING MENU. This menu will guide you through alarm and event

54N.O.: Normal Open contact. N.C.: Normal Closed contact. Network Alarm: Check this box to send out a network alarm to a client PC when motion occur

554.5.5 Event This section covers notifications due to internal system event warnings. Figure 4-5 Alarm & Event Menu – Event Event: Select

56Fan Failure: Figure 4-12 Alarm & Event Menu – Event – Fan Failure Log: Check box to record fan failure events in the log. Buzzer: Check box

57HD Temperature: Figure 4-13 Alarm & Event Menu – Event - HD Temperature Log: Check box to record HDD temperature events in the log. Buzzer:

58HD Failure: Figure 4-14 Alarm & Event Menu – Event - HD Failure Log: Check box to record events in the log. Buzzer: Check box to enable the

59HD Full: Figure 4-15 Alarm & Event Menu – Event - HD Full Log: Check box to record events in the log. Buzzer: Check box to enable the buzz

60HD Off: Figure 4-16 Alarm & Event Menu – Event - HD Off Buzzer: Check box to enable buzzer if the hard drive is turned off (disconnected) or

61Power Loss: Figure 4-17 Alarm & Event Menu – Event – Power Loss Log: Log is permanently checked for this feature. Power Loss events are alwa

vi 2.2.3 Front Panel Key Review...

62Record Stop: Figure 4-18 Alarm & Event Menu – Event – Record Stop Log: Check box to record events in the log. Buzzer: Check box to enable bu

63Network Loss: Figure 4-19 Alarm & Event Menu – Event – Network Loss Log: Check box to record events in the log. Buzzer: Check box to enable

644.6 SCHEDULE SETTING Figure 4-20 is a screenshot of the SCHEDULE SETTING MENU. In this menu you can set a unique configuration to enable recordin

65Event Frame Rate: FPS recording rate for events. Selectable frame rate includes 30fps, 15fps, 10fps, 7.5fps, 5fps, 1fps or 0fps. (0fps means no ev

66One time: This entry is used only once, on that specific date. Month/date: Uses this entry on the same month and day, every year (e.g. January 1 f

67To Set Schedule using Mouse 1. Click on desired start time block (no numbers on it) on a time bar. At this time, the selected time block will be

68 3. Selecting camera: Use Right/Left arrow keys to select desired camera to configure. Selected camera number will be highlighted by a blue frame

69 7. Changing recording mode (color) of a timezone: Use Right/Left arrow key to switch to the first block (with number on it) of a timezone. Click

70Record: Displays Record mode Resolution: Recording resolution is displayed. Normal: Frame rate in images per second for continuous recording. It

71 4.6.7 Alarm Action Figure 4-24 Schedule Menu-Alarm Action Defines recording response to “alarm” input trigger signals by time of day on speci

vii 4.7.4 Alarm Server ...

722. Click on the number of the alarm trigger input you wish to configure. That number will be framed in blue. 3. Click on a desired start time b

733. Selecting alarm: Use Right/Left arrow key to select an alarm to configure. Selected alarm number will be highlighted by a blue frame. See abov

74Apply to Days: This button can be used to copy schedules to other days. Select which days you wish to copy to. "Select All" selects all

75 Figure 4-25 Network Menu – LAN 4.7.1 LAN Network Type: Static IP: User can set a fixed IP for network connection. DHCP: DHCP server in LAN will

76a. If using DHCP, all settings will be detected automatically. While DHCP is a useful tool for determining the network settings, if you set up you

7750,000 to your house number: 50,123 is less likely to lead to a port conflict. For a list of the known and registered ports, see http://www.iana.o

78Sender Email: Input the e-mail address of the sender (the DVR). Sender’s e-mail address has to match the user name and password above. Receiver Em

79Press the Select or Submit/Update button to synchronize the DVR with the DDNS server. You should see an indication of “Success” on the screen. If

804.7.4 Alarm Server Figure 4-29 Network Menu – Alarm Server This menu defines the parameters for communicating with a PC running PowerCon softwar

814.8 DISK INFORMATION 4-30 is a screenshot of the DISK INFORMATION MENU. This menu is used to review the DVR’s hard drive settings and status. No

11 PRODUCT OVERVIEW Join the revolution in CCTV technology: deliver and record High Definition image quality using traditional coaxial cable*! Retai

824.8.2 Lock 4-31 is a screenshot of the DISK LOCK/FORMAT MENU. This menu is used to control the portion of the DVR’s hard drive reserved for locke

834.9 DISPLAY SETTING Figure 4-32 is a screenshot of the DISPLAY SETTING MENU. This menu will walk you through the Main Monitor On-Screen Display (

844.9.2 Main M/T SEQ Figure 4-33 Display Menu – Main M/T SEQ Step: Sequence order. For reference. Camera: Select which camera appears in the curr

854.10 SYSTEM SETTING Figure 4-34 is a screenshot of the SYSTEM SETTING MENU. This menu is for setting up the general system parameters for the DVR

864.10.2 Daylight Saving Figure 4-35 System Menu – Daylight Saving Daylight Saving: Check the box to enable automatic daylight saving time adju

874.10.3 User User Menu is where you can add or delete different login IDs on the system as well as set access levels. See the charts below for a l

88Edit Click “Edit” button to make changes to an existing user account. Press “Save” button to save changes or “Cancel” to exit without making chang

89There are three system access levels. The following charts show the rights of each level. Main Menu at the DVR User Level and Right RIGHT ADMINI

904.10.4 I/O Control Figure 4-39 is a screenshot of the I/O Control Setting Menu. This menu is used to define the settings for controlling the DVR

91Baud Rate: The speed used to transmit instructions or information through the RS485 port on the DVR. Choose from the following speeds: 1200, 2400,