EverFocus EDVR 16D1 Manuál s instrukcemi Strana 21

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 155
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 20
11
1111
11
The last display on the screen has a “*” sign in the top-middle. The sign will replace
the “*” in the display when sequence occurs.
Note: Sequence is invalid when the multi-screen display is showing all cameras.
Temperature indication.
This shows if the hard drive’s temperature is overheated.
Overheat temperature is determined in HDD TEMPERATURE of WARNING
SETUP MENU.
Fan fail indication.
This shows when the fan fails to work normally. If you get this warning, contact
technical support for assistance.
3
. Select sign: You can assign a camera to a display by pressing SELECT key in live
mode. Dial Jog to move the select sign to the display you would like to change camera,
and then press channel key on the front panel to choose that channel. Press SELECT
again to exit from this mode.
4
. Play status bar: The play status bar appears in play back mode if you enable a
status bar on the screen (Please see DISPLAY, 8
th
item of Front Panel Keypads).
There are three parts that will be shown: play date, play status, and play time.
1. Play date
The date on which the video was recorded.
2. Play status
PAUSE”, when the video playback is paused.
P## >” means normal play speed on the displayed disk number;
P## <“ means normal reverse play speed on the displayed disk number;
>> x N” means N time fast play speed;
<< x N” means N time fast reverse play speed.
3. Play time
The play time at which the video is recorded. The time format depends on the
time format setting in the TIME/DATE SETUP MENU.
Play Date Play Status Play Time
S
T
F
Zobrazit stránku 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 154 155

Komentáře k této Příručce

Žádné komentáře