EverFocus EDVR 16D1 Manuál s instrukcemi stáhnout pdf (Strana 102)

9292

 Use the prior step to assign an IP address. For example, if you got the IP

address from the computer of 192.168.002.101. Assign the DVR’s IP address

as 192.168.002.050. Now Copy the subnet mask and default gateway

information you got from the prior step off the computer to the DVR.

Note: Make sure the modem is in bridge mode. If your Internet Service Provider

provides a modem that includes a built-in router, you will need to disable the

router functionality.

5. The next step is to open ports within your router. Open virtual ports in the router (Log

into the router using a PC)

o EDVR Ports to open: 80, 1600, 37260



Note: If your Internet service provider blocks port 80 you may use a

different port to access the DVR through the DVR’s Network Menu Setup.

(page 36)



Note: If you wish to have multiple users log into the DVR please open a range

for the control and data ports on your router. For example if you would only

like 4 clients to connect to the DVR open 1600 ~1603 and 37260 ~ 37263.

 If you have a Dynamic IP address and have opened the ports, go to Chapter

13 to Configure DDNS.

6. To access the DVR from a computer simply open Internet Explorer and in the

address bar type:

http:// the IP address of your internet service provider.



Note: If your Internet service provider blocks port 80 you may use a

different port to access the DVR through the DVR’s Network Menu Setup.

If you do this, you will connect by going to the address bar and typing:

http:// the IP address of your service provider : the new port number

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 154 155

Žádné komentáře

EverFocus EDVR 16D1 Manuál s instrukcemi Strana 102