EverFocus 630 TVL Provozní pokyny

Procházejte online nebo si stáhněte Provozní pokyny pro Bezpečnostní kamery EverFocus 630 TVL. EverFocus 630 TVL Operating instructions Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 19
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
EVERFOCUS
Model No. EHD630s
700TVL Super Low Light
D-WDR & 3-Axis Gimbal Mechanism
Vandal Proof & Weather Resistant
Outdoor IR Dome Camera
Operating Instructions
Please read this manual first to ensure correct installation and operation. This manual should be retained for
future reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers, because the electromagnetic fields generated by these devices may distort the video image or
otherwise interfere with camera functions.
2. Never disassemble the camera beyond the recommendations in this manual, nor apply materials to it
other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other damage.
3. Try to avoid pointing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal circuits.
It may also create unbalanced illumination that may be beyond the camera’s ability to compensate.
4. Keep the power cable away from water and other liquids. Never touch the power cable with wet
hands.
Touching a wet power cable with your hands or touching the power cable with wet hands may result in
electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may cause equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with your hands.
Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens. Use a
damp soft cloth to remove any dirt from the camera body. Do not use complex solvents, or corrosive or
abrasive agents to clean any part of the camera.
Zobrazit stránku 0
1 2 3 4 5 6 ... 18 19

Shrnutí obsahu

Strany 1 - Operating Instructions

EVERFOCUS Model No. EHD630s 700TVL Super Low Light D-WDR & 3-Axis Gimbal Mechanism Vandal Proof & Weather Resistant Outdoor IR

Strany 2 - 1. INTRODUCTION

9 - AUTO Select AUTO to adjust the BLC automatically. The range is 000~015. - MANUAL LEVEL Selecting MANUAL lets you select the AREA and MA

Strany 3

10 3200K Select this mode when the color temperature is around 3200°K (when surrounded by sodium lights). Press ENTER if you want to access the setti

Strany 4 - 2. CAMERA OVERVIEW

11  Camera performance improves when digital “video noise” levels are reduced. When recording digitally, the image file size can also be lessened

Strany 5 - <┘” symbol at the end

12 switch from DAY mode to NIGHT mode. Selectable values are 0~63. •NIGHTDAY: When the camera detects the current light level is higher than th

Strany 6

13 SHARPNESS Level: 000~015. The contour of the video image becomes cleaner and more distinguished as the level of SHARPNESS increases. If the level

Strany 7 -

14 MOTION DETECTION If you want your camera to detect motion, set this submenu item to ON and click ENTER to open its settings submenu. - D

Strany 8 -

15 - AREA SEL Up to 15 areas can be masked. Use your LEFT and RIGHT buttons to select the number of the mask you want to switch on/off or edit. By d

Strany 9 -

16 HLC (High Light Compensation) - MODE Toggle between OFF, ON, and AUTO. - CLIP LEVEL Select the value of the HLC clip level – from

Strany 10 -

17 position you want it to be. - CLR Select to clear one letter of the input. - POS Adjust the position of the camera ID. SYNC (Only available

Strany 11 - ** MAIN MENU **

18 EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 2698 2380 www.everfocus.com.tw

Strany 12

1 7. Do not operate the camera beyond the specified temperature, humidity and power source levels. This camera is suitable for indoor operation onl

Strany 13

2 1.2 PACKAGE CONTENTS  1 x EHD630s Camera with pigtail  1 x EHD630s User Manual  1 x Accessory pack with screws  1 x Mounting template  1

Strany 14 - ** EFFECT **

3 2. CAMERA OVERVIEW 2.1 Description of Camera Parts ①. FAR/NEAR Adjuster Use this to adjust the lens to focus near or far. ②.

Strany 15 -

4 2.2 Dimensions 3. On-Screen Display (OSD) Controls 3.1 OSD Control Stick ① ENTER Press this button (by pressing straight down on t

Strany 16 -

5 ③ L (LEFT) Press this button (by pressing the control stick to the left) to move the cursor to the left to select items or to adjust the l

Strany 17 -

6 4. Open submenus Right-hand items (or “modes”) with a “<┘” symbol at the end contain submenus. For adjusting submenu items, select the desired

Strany 18 - EverFocus Electronics Corp

7 MODE There are two modes to select from: AUTO IRIS and SHUT+AUTO IRIS. To change the mode, highlight the MODE field and press the LEFT and

Strany 19

8 4.3 WDR 1. When the main menu is displayed on the screen, use the UP and DOWN buttons to scroll to the “WDR” menu item. 2. Press the LEF

Komentáře k této Příručce

Žádné komentáře