EverFocus EMV800 Uživatelský manuál stáhnout pdf (Strana 70)

4.5 Date/Time Setting

Figure 4-24 is a screenshot of the DATE/TIME SETTING MENU. This menu is for setting up the date/time

parameters for the DVR.

Figure 4-24 Date/Time Settings

4.5.1 Date/Time Settings

Time Zone: Set the time zone that the DVR adjusts to when updating from the time server.

Date: Set current Date.

Time: Set current Time.

Date Format: Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.

Time Format: Change time format between 12H and 24H mode.

Time Synchronization: Select “Off”, “NTP” or “GPS” for time synchronization.

If selecting “NTP”, you will be able to do the following NTP settings:

Update Interval: The frequency that the system automatically updates the time via the NTP server. Select

Daily, Weekly, or Monthly.

NTP Server: Displays the time server address that the DVR uses for time synchronization. Requires

operating network configuration and WAN or LAN access to a compatible NTP server.

To find a compatible NTP address, please follow these steps:

a) Go to a PC that is connected to the internet.

b) Click on “START” -> “RUN” -> type “command” and press “OK”.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 136 137

Žádné komentáře

EverFocus EMV800 Uživatelský manuál Strana 70