EverFocus ECOR264-D2 guide Uživatelský manuál stáhnout pdf (Strana 61)

4.5.2 Event

This section covers notifications due to internal system event warnings.

Figure 4-11 Alarm & Event Menu – Event

Event: Select from the following event types.

HD Temperature: Hard drive is over the safety warning temperature.

HD Failure: If DVR fails to detect the HDD on start up, the system will create an HD failure event.

HD Full: If the DVR is not set to Overwrite in the Record Menu, an event will be created when the HDD

is filled.

HD Off

: If HDDs are switched off or are removed, the DVR will create an HD OFF event.

Power Loss: If power is disconnected, an alarm event will be triggered when power is restored.

Network Loss: If connection to the local network is lost, DVR will create a Network Loss event.

NOTE: This function only checks the physical connection (link) to the network. Any network behavior

that blocks data connectivity (blocked ports, IP addressing errors, etc.) is not detected by this function.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 139 140

Žádné komentáře

EverFocus ECOR264-D2 guide Uživatelský manuál Strana 61