EverFocus Paragon264 1TB Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Digitální videorekordéry (DVR) EverFocus Paragon264 1TB. EverFocus Paragon264 1TB Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 134
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - Instruction Manual

Instruction Manual PPAARRAAGGOONN226644xx44//226644xx22 SSeerriieess DDVVRR

Strany 2

3  Mouse x 1  DVR x 1  User manual x 1

Strany 3

93 6.4 Virtual Ports A port number represents a "channel" or entryway for network communications. Port numbers allow differe

Strany 4

94 Do you have a static IP address? ______________ A Static IP address means you use the same IP address every time

Strany 5 - TABLE OF CONTENTS

95 6.7 Simple One to One Connection Crossover Ethernet Cable Pin outs: The Figure below shows the pin configurations for a cross-over cable.

Strany 6

96  Assign an IP of 192.168.001.003, a Subnet Mask of 255.255.255.000, and a Gateway of 192.168.001.001. You can ignore DNS Server.

Strany 9 - 1.2 PACKAGE CONTENTS

99  Click on the option that says “Use the following IP address”  Assign an IP address of 192.168.1.2, a Subnet Mask of 255.255.255.0, and

Strany 10 -  User manual x 1

100 6.8 Direct High Speed Modem Connection Straight Through Ethernet Cable Pin outs: The Figure below shows the pin configurations for a strai

Strany 11 - 1.3 SPECIFICATIONS

101  Once you have a straight through cable plug one end into the LAN port on the back of the recorder and the other into the high speed modem. 

Strany 12 - 1.4 FRONT PANEL

102 6.9 Router or LAN Connection Straight Through Ethernet Cable Pin outs: The Figure below shows the pin configurations for a straight cabl

Strany 13

4 1.3 SPECIFICATIONS Paragon264x4 Paragon264x2 Channel Number 16 8 16 Compression Format H.264 HDMI Video Output (1080p) Yes Recording Rate/

Strany 14

103  Once you have a straight through cable plug one end into the LAN port on the back of the recorder and the other into the router.  Log int

Strany 15 - 1.5 REAR PANEL

104 number of the IP address. For example, if the IP address of the computer is 192.168.2.101, the DVR’s IP address should be 192.168.002.050. 

Strany 16

105 7 REMOTE OPERATION FROM BROWSER 7.1 CONNECTING TO DVR To access the DVR from a computer, open an Internet Explorer window and in the address ba

Strany 17 - 1.6 HDD INSTALLATION

106 7.2 BROWSER SECURITY SETTING 7.2.1 Installing ActiveX controls When you first connect to the DVR’s IP address, you should see a screen like t

Strany 18 - 2 INSTALLATION

107 Install the ePlusDVR.cab file when prompted to do so. Once the file finishes installing, you will return to the same login page as before. Ty

Strany 19

108 7.2.2 Enabling ActiveX Controls Note: This section is only necessary if you DO NOT see the yellow ActiveX bar at the top of your browser screen

Strany 20 - 2.2 AUDIO INSTALLATION

109 In the Security Settings window, scroll to “ActiveX controls and plug-ins” Set the controls as follows: “Enable”:  Allow previously unuse

Strany 21

110 Close the window so you are back at the login screen. Click the Refresh button to reload the page. Install the ePlusDVR.cab file when promp

Strany 22 - Output relay in idle state

111 7.3 REMOTE LIVE VIEW 1. In the main page, you will see live images in a 16-screen display (or 8 screens, depending on the model). 2. The st

Strany 23 - RS-485 bus serial wiring

112 7.4 REMOTE PTZ CONTROL 1. Use Direction Arrows (up, down, left, right) to move the camera to the desired direction and angle. 2. In Zoom opt

Strany 24

5 RS-485 1 RS485 (3 Terminal connector) Power Source 100VAC~240VAC Dimensions (L x W x H) 410 x 430 x 88 mm / 16.2" x 16.9" x 3.5"

Strany 25 - 2.6 USB-Mouse installation

113 a. Click “Tour” button b. Click the number of the desired tour c. Click “Go” button 12. Steps to remove a tour a. Click “Tour” button b. Cl

Strany 26 - 2.7 NETWORK CONNECTION

114 7.5 REMOTE PLAYBACK To playback the video, press “Search” button. Select from “Time Search”, “Event Search”, or “Motion Search”.

Strany 27 - 2.8 FINAL INSTALL PROCESS

115 8 EVERFOCUS DDNS SETUP Setup Steps: Step 1. Set up the Network Menu according to the instructions detailed in the Networking chapter. (Make s

Strany 28 - Figure 3-2 OSD Menu

116 9 LINKSYS & D-LINK PORT FORWARDING 9.1 LINKSYS PORT FORWARDING This section will cover a few simple configurations for the Linksys router.

Strany 29

117 Applications and Gaming allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other

Strany 30

118 9.2 D-LINK PORT FORWARDING This section will cover a few simple configurations for the D-Link router. This chapter is only to offer some help

Strany 31 - Figure 3-3 (OSD Menu)

119 Click Virtual Servers on the left to bring up the following screen. Virtual Servers allows users who are connecting remotely to access servic

Strany 32

120 Here is an example of the information for each service: Name Private IP Protocol Private Port Public Port Schedule HTTP 192.168.1.50 Bot

Strany 33

121 10 TROUBLESHOOTING If you have problems with the system, run through the following checklist to see if you can solve the probl

Strany 34 - 4 GENERAL DVR OPERATIONS

122 APPENDIX A: TIMING OF ALARM MODES Transparent Mode Input EventAlarm Durationtt Event = t Reaction t Event: Duration of alarm input source (m

Strany 35 - 4.5 PLAYBACK

6 16x 4x 9x 13x 10x

Strany 36

123 Timeout Mode tInput EventAlarm Durationt Duration = t Reactiont Event t Event: Duration of alarm input source (motion, contact, system eve

Strany 37 - 4.6 PTZ

124 Timeout Mode: Retrigger of Alarms t Event: Duration of alarm input source (motion, contact, system events...) t Duration: Alarm duration

Strany 38 - Focus

125 APPENDIX B: CHANGING RULE FOR EXPRESS SETUP Case 1: Record Mode: Normal + Event Record With: Recording days DVR will Auto adjust Quality and

Strany 39 - 4.7 LAYOUT

126 Case 3: Record Mode: Normal + Event or Event Only Record With: Preset Setting DVR will apply setting in below table to all cameras according to

Strany 40 - 4.9 DISPLAY

127 Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 6

Strany 41 - 4.11 MONITOR

7 16) ENTER: Enter Key for menu operation and alarm acknowledge Turn camera audio ON/OFF when viewing full screen camera. For more details, pleas

Strany 42 - 4.12 ZOOM

8 1.5 REAR PANEL During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the

Strany 43 - 4.13 SEARCH

9 ○○○○9 HDMI: Connect to an HDMI-compatible unit. This HDMI-compatible unit will be treated as another call monitor. Please use HDMI cables that

Strany 44

10 1.6 HDD INSTALLATION Before installing the HDDs, please check the location to install HDDs. The following picture shows the locat

Strany 45

11 2 INSTALLATION 2.1 VIDEO INPUTS/OUTPUTS INSTALLATION Cameras have to be cabled with 75 Ohm video cable, e.g. RG-59, RG-12 and suitable BNC plu

Strany 46

12 All connected video sources must provide a 1 Vpp NTSC/EIA or PAL/CCIR standard video signal (depending on DVR version PAL / NTSC). When interco

Strany 47 - 4.14 COPY

E V E R FOC U S E L E C T R O N I C S C O R P O R A T I O N PARAGON264x4/264x2 Series DVR Instruction Manual  2010 EverFocus Electronics Corp ww

Strany 48 - 4.15 LOGOUT

13 2.2 AUDIO INSTALLATION The DVRs provide 16/8 audio inputs and 1 audio output. The inputs are designed for max. 1 Vpp @ 20 KOhm input. The in

Strany 49 - 5 DVR CONFIGURATION

14 2.3 ALARM / CONTROL CONTACTS INSTALLATION The alarm inputs can be used for recording start or recording rate adjustment. Furthermore, alarm rea

Strany 50

15 CTRL INGND CTRL INGND Idle state Playback 2. Record: The input switches to Record (or Record Standby) as lon

Strany 51

16 2.4.1 General RS-485 bus installation The EKB-500 keyboard uses an RS-485 simplex wiring; the signal is transferred via a single twisted pair li

Strany 52 - 5.3 CAMERA SETTING

17 An RS-485 distributor can also be used to increase the maximum number of devices on the bus as well as the total range. Each distributor output p

Strany 53

18 2.4.5 Speed Dome Installation Speed dome or telemetry receiver pan/tilt/zoom control is available through web browser or the optional PowerCon

Strany 54

19 2.7 NETWORK CONNECTION This section only describes physical connection to an Ethernet network. This step must be completed before the DVR’s can

Strany 55

20 Figure 2-2 Network Connection through Patch Cable Pinout of straight patchcable 2.8 FINAL INSTALL PROCESS Once you have completed the basic

Strany 56

21 3 MOUSE AND FRONT PANEL OPERATION Paragon 264x4/264x2 series DVR supports multiple sources to control the DVR. It can be controlled with a mouse,

Strany 57

22 Figure 3-2 OSD Menu ○1 In section 1, there are ten setup options available. Move the mouse over an icon and click to select it. ○2 In sect

Strany 58

iiiiiiii Safety Precautions • To avoid any damage, please consider the following safety warnings: • Never place the recorder near to heaters, fur

Strany 59

23 * Note about on-screen keyboard: Click on a button to input that character. The buttons on the right and bottom have the following functions: De

Strany 60

24 3.2 GENERAL FRONT PANEL OPERATION 3.2.1 How to select a channel / Enable audio 1. In a view consisting of more than one channel, turning Jog o

Strany 61

25 Figure 3-3 (OSD Menu) ○1 In section 1, there are ten setup options available. Use Jog or Shuttle to highlight an icon and press “Enter” to sel

Strany 62 - Figure 5-10

26 Bar: Press “Enter” key to activate the slider, then use Jog to adjust the setting. Press “Enter” again to finalize the changes.

Strany 63

27 4 GENERAL DVR OPERATIONS This chapter introduces the operations on major functions including playback, layout change, sequence, triplex o

Strany 64

28 + To input password using front panel: press “Enter” key to show the on-screen keyboard (see Figure 4-2 On-screen Keyboard). Use Jog or Shuttle t

Strany 65

29 By front panel: Press key to enter Playback Setup Menu. A playback bar will show as the figure below: 2009/05/25 09:09:30PM 2009/05/25 09:0

Strany 66

30 4.6 PTZ 4.6.1 General PTZ control Right-click to bring up the menu bar and click on to enter PTZ Menu. The following actions can be perform

Strany 67

31 Click “C” to clear the digit in cell Click “X” at top-right corner to close PTZ menu. Click “Exit” to leave PTZ function. 4.6.2 Express contro

Strany 68

32 4.7 LAYOUT The DVR has a total of seven display modes available. The different available layouts are shown below: (Full screen)

Strany 69

iiiiiiiiiiii This Product is RoHS compliant. WEEE The information in this manual was current upon publication. The man

Strany 70

33 By front panel: Press any channel key to bring that channel to full screen mode. 4.8 CHANNEL SWITCHING Use this function to change channel posi

Strany 71

34 4. Press again to show both status information and camera information. 5. Press again to hide all information. 4.10 SEQUENCE 1. By mouse: Cl

Strany 72

35 4.12 ZOOM 1. Make sure no cameras are in playback mode 2. Select one camera 3. Right-click to bring up the menu bar and click button, or p

Strany 73 - 5.6 SCHEDULE SETTING

36 4.13 SEARCH By mouse: Right-click to bring up the menu bar and click to enter Search Menu. By front panel: Press ”Search” key to enter Search

Strany 74

37 4.13.2 Event Search Figure 4-6 Search Menu – Event Search From: Select starting date and time To: Select ending date and time. Camera: Select w

Strany 75

38 Prev Page: Go to previous page. Next Page: Go to next page Unlock: Unlock the item if the item is locked Lock: Lock the item (After click Lock

Strany 76

39 Figure 4-7 Search Menu – Motion Search From: Select motion search starting date/time. To: Select motion search ending date/time. Camera: Selec

Strany 77

40 Choose which areas of the motion grid will be included in the search. The areas you set in motion search must also be active in the motion setti

Strany 78

41 Archive To: Select whether you want to copy to USB or DVD. Data Size: Shows the estimated total size for the selected time period. (Paragon DVR i

Strany 79

42 5 DVR CONFIGURATION This chapter will walk you through the DVR Menu Settings step by step and show you how to set the DVR for your specific appli

Strany 80 - 5.7 NETWORK SETTING

iviviviv TABLE OF CONTENTS 1 PRODUCT OVERVIEW...

Strany 81

43 Date: Set the current date of DVR. Time: Set the current time of DVR. Resolution: Select recording resolution based on video format. NTSC: 704x

Strany 82 - Figure 5-26 EverfocusDDNS

44 DHCP: DHCP server in LAN will automatically assign IP for network connection. PPPoE: IP Address: This field shows the current IP Address for the

Strany 83 - Figure 5-27 www.dyndns.org

45 5.3 CAMERA SETTING Figure 5-2 is a screen shot of the CAMERA SETTING MENU. This menu is used to configure individual camera settin

Strany 84

46 Covert: Check the box to hide the camera picture in live and sequence modes. However, the image will still be recorded and can be played back by

Strany 85 - 5.8 DISPLAY SETTING

47 5.3.2 Video Adjust Figure 5-3 Camera Menu – Video Adjust Camera: Select the camera you wish to adjust. “Title” will change to the name of the

Strany 86

48 5.3.3 Motion Figure 5-4 Camera Menu – Motion Camera: Select the camera you wish to adjust. “Title” will change to the title name of the selec

Strany 87 - 5.9 DISK SETTING

49 Auto Lock: Check the box and the events will be recorded in the write protected segment of the Hard Disk. (DVR will lock a period of time when al

Strany 88

50 Figure 5-5 Camera Menu – Motion Grid Setting Apply To: This button can be used to copy the motion settings to other cameras. Select which ca

Strany 89

51 5.3.4 Video Loss Figure 5-6 Camera Menu – Video Loss Camera: Select the camera you wish to adjust, “Title” will change to the title name of t

Strany 90 - 5.10 SYSTEM SETTING

52 Apply To: This button can be used to copy the video loss settings to other cameras. Select which cameras you wish to copy to. "Select A

Strany 91

vvvv 4.1 RECORD... 27 4.2 LOG

Strany 92

53 For Schedule recording, the only way to stop schedule recording is to turn schedule recording off. Pressing any keypad on front panel to ch

Strany 93

54 5.4.3 Play Figure 5-9 Record & Play Menu - Play Quick Playback: Check the box to enable quick playback function. Playback From X Seconds

Strany 94 - Figure 5-39

55 5.5 ALARM & EVENT SETTING Figure 5-10 is a screen shot of the ALARM & EVENT SETTING MENU. This menu will walk you through alarm and e

Strany 95

56 Recording: Select which cameras will start recording when alarm happens. Email Notify: Check box to enable email notification when an alarm occur

Strany 96 - 5.11 INFORMATION SETTING

57 5.5.2 Event This section covers internal system event warnings. Figure 5-11 Alarm & Event Menu – Event Event: Select from the following

Strany 97 - Figure 5-43

58 Fan Failure: Figure 5-12 Alarm & Event Menu – Event-Fan Failure Log: Check box to record events in the log. Buzzer: Check box to enable b

Strany 98 - Figure 5-43 Log List

59 HD Temperature: Figure 5-13 Alarm & Event Menu – Event - HD Temperature Log: Check box to record events in the log. Buzzer: Check box to e

Strany 99 - 6 Networking Overview

60 HD Failure: Figure 5-14 Alarm & Event Menu – Event - HD Failure Log: Check box to record events in the log. Buzzer: Check box to enable bu

Strany 100 - 6.5 Pre-Installation

61 HD Full: Figure 5-15 Alarm & Event Menu – Event - HD Full Buzzer: Check box to enable buzzer when hard drive is full. Email Notify: Check

Strany 101

62 HD Off: Figure 5-16 Alarm & Event Menu – Event - HD Off Buzzer: Check box to enable buzzer when hard drive is off. Email Notify: Check box

Strany 102

vivivivi 5.8.2 Main M/T SEQ ...

Strany 103

63 Power Loss: Figure 5-17 Alarm & Event Menu – Event – Power Loss Log: LOG is permanently checked for this feature. Power Loss events are alw

Strany 104

64 Record Stop: Figure 5-18 Alarm & Event Menu – Event – Record Stop Log: Check box to record events in the log. Buzzer: Check box to enable

Strany 105

65 Network Loss: Figure 5-19 Alarm & Event Menu – Event – Network Loss Log: Check box to record events in the log. Buzzer: Check box to enable

Strany 106

66 5.6 SCHEDULE SETTING Figure 5-20 is a screen shot of the SCHEDULE SETTING MENU. In this menu you can set a unique timer to start recording durin

Strany 107

67 Event Action: Check this box to enable Buzzer, Alarm out, E-mail and Network actions when an event occurs on the selected time period. App

Strany 108

68 Month/weekday: Repeats recording on a specific day of the month/week. Details: Specifies the date to be recorded. Prev: Previous Page (30 Holida

Strany 109

69 2. Change the section to different mode (with different color) by clicking on the first block of each section. The color swatches from gray ->

Strany 110

70 6. Editing blocks in a time bar: when a time bar is selected (highlighted in red frame), press Enter button, then the first bl

Strany 111

71 Press “Edit Timezone” button to edit the time zone. Figure 5-23 Schedule Menu-Schedule-Edit Timezone Editing Timezone: From: Displays schedule

Strany 112 - 7.1 CONNECTING TO DVR

72 Apply to Cameras: This button can be used to copy schedules to other cameras. Select which cameras you wish to copy to. "Select All"

Strany 113

1 1 PRODUCT OVERVIEW The latest EverFocus digital video recorder generation is based on H.264 compression technology, resulting in enhanced recordin

Strany 114

73 5.7 NETWORK SETTING Figure 5-24 is a screen shot of the NETWORK SETTING MENU. This menu is for configuring the DVR for a network connection. NO

Strany 115

74 HTTP Port: Port number for HTTP/WEB communication. Bandwidth Limit: Allows user to limit the bandwidth used by the DVR. 5.7.2 EMAIL Figure 5-2

Strany 116

75 5.7.3 DDNS DDNS Server: Select either “EverfocusDDNS” or “www.dyndns.org” as the DDNS provider. If DDNS will not be used, simply select “Disab

Strany 117

76 www.dyndns.org Figure 5-27 www.dyndns.org Host name: Host name created through the dyndns account. User name: User name of the dyndns account

Strany 118 - 7.3 REMOTE LIVE VIEW

77 5.7.4 Alarm Server Figure 5-28 Network Menu – Alarm Server Server IP1~3: IP address of client PC with installed PowerCon Software. The networ

Strany 119 - 7.4 REMOTE PTZ CONTROL

78 5.8 DISPLAY SETTING Figure 5-29 is a screen shot of the DISPLAY SETTING MENU. This menu will walk you through Monitor On-Screen Display (OSD) an

Strany 120

79 5.8.2 Main M/T SEQ Figure 5-30 Display Menu – Main M/T SEQ Step: Sequence order. Cannot be changed. Camera: Select which camera appears on the

Strany 121 - 7.5 REMOTE PLAYBACK

80 5.9 DISK SETTING Figure 5-32 is a screen shot of the DISK SETTING MENU. This menu is used to review and manage the DVR’s hard drive settings.

Strany 122 - 8 EVERFOCUS DDNS SETUP

81 5.9.2 Lock/Format Figure 5-33 Lock/Format Menu Maximum Lock (%): User can set the maximum lock percentage of the HDD volume. After setting

Strany 123 - 9.1 LINKSYS PORT FORWARDING

82 Note: the following rules apply to Hot Swappable model only 1. If user takes out the HDD and put it back (with the same HDD) to the same DVR. It

Strany 124

2  Express Playback: Simply point, click and drag the playback bar to view previous recordings  Express Search: Use intuitive playback bar with

Strany 125 - 9.2 D-LINK PORT FORWARDING

83 5.10 SYSTEM SETTING Figure 5-34 is a screen shot of the SYSTEM SETTING MENU. This menu is for setting up the system configurati

Strany 126

84 5.10.2 Daylight Saving Figure 5-35 System Menu – Daylight Saving Daylight Saving: Check the box to enable daylight saving time. Start Date:

Strany 127

85 5.10.3 User User Menu is where you can add or delete different users on the system as well as set administrator rights. Figure 5-36 System Menu

Strany 128 - 10 TROUBLESHOOTING

86 Edit Click “Edit” button to make changes to an existing user account. Press “Save” button to save changes or “Cancel” to exit without making chan

Strany 129 - Appendix

87 5.10.4 I/O Control Figure 5-39 is a screen shot of the I/O Control Setting Menu. This menu is used to define the settings for controlling t

Strany 130 - Alarm Duration

88 5.10.5 Misc. Figure 5-40 System Menu – Firmware & Misc. Firmware Current Firmware Version: Displays the current version. Firmware Upgrade:

Strany 131

89 5.11 INFORMATION SETTING Figure 5-41 is a screen shot of the INFORMATION SETTING MENU. This menu displays important system information. Figure

Strany 132

90 5.11.2 Log Figure 5-42 Information Menu – Log Log Type: Event: to see log sorted by event. User: to see log sorted by user. Operation: to

Strany 133 - Record With: Preset Setting

91 Figure 5-43 Log List Prev Page: Go to the previous page of log. Next Page: Go to the next page of log. Close: Close the window

Strany 134

92 6 Networking Overview This chapter will give you a basic instruction on how to set up the DVR for network connection. It is highly recommended t

Komentáře k této Příručce

Žádné komentáře