EverFocus EHD360 Uživatelský manuál stáhnout pdf

EVERFOCUS

High Resolution Vandal Proof

Weather Resistant 3-Axis IR Dome Camera

Operation Instructions

Model No.

EHD360

Please read this manual first for correct installation and operation. This manual should be retained

for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are therefore

subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers

and audio speakers since the electromagnetic fields generated from these devices may distort

the video image or otherwise interfere with camera operation.

2. Never disassemble the camera beyond the recommendations in this manual nor

introduce materials other than those recommended herein.

Improper disassembly or introduction of corrosive materials may result in equipment failure

or other damage.

3. Try to avoid facing the camera toward the sun.

In some circumstances, direct sunlight may cause permanent damage to the sensor and/or

internal circuits, as well as creating unbalanced illumination beyond the capability of the

camera to compensate.

4. Keep the power cord away from water and other liquids and never touch the power

cord with wet hands.

Touching a wet power cord with your hands or touching the power cord with wet hands may

result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents.

Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning

For cameras with interchangeable lenses, do not touch the surface of the sensor directly with

the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and

the camera lens. Use a damp soft cloth to remove any dirt from the camera body. Please do

not use complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.

7. Do not operate the camera beyond the specified temperature, humidity or power source

ratings. This camera is suitable for indoor and outdoor operation.

1 2 3 4 5 6 7

Shrnutí obsahu

Strany 1

EVERFOCUS High Resolution Vandal Proof Weather Resistant 3-Axis IR Dome Camera Operation Instructions Model No. EHD360 Please read this

Strany 2 - PACKAGE CONTENTS

1 Use the camera at temperatures within -10°C to +50°C (14°F to 122°F) and in an IP66 compliant environment; this device is not rated as submersib

Strany 3 - SPECIFICATIONS

2  Camera Unit x 1  Mounting kit includes: -Screws x 4 -Security wrench for housing screws x 1 -Expanding Screws x 4 -Wash

Strany 4 - INSTALLATION INSTRUCTIONS

3 DIMENSIONS INSTALLATION INSTRUCTIONS Drill the Holes 1. Locate the desired mounting location; position housing with ca

Strany 5

4 3. Tighten the 4 mounting screws to secure the camera body to the mounting surface. 3. If you need to wire cable through side conduit hole,

Strany 6

5 6. (Optional) Pass the power/video wire under the base plate and up through the center hole. 7. Position the power/video wire so that it does no

Strany 7 - EverFocus Electronics Corp

6 EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 269

Komentáře k této Příručce

Žádné komentáře

EverFocus EHD360 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Bezpečnostní kamery EverFocus EHD360. EverFocus EHD360 User's Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní kamery EverFocus EHD360